4 ways to make wings for a costume

Table of contents:

4 ways to make wings for a costume
4 ways to make wings for a costume
Anonim

A great way to save money is to make your own wings for a Halloween costume. In addition, adults and children can apply different art materials (such as paint or glitter) to personalize them and make them unique. All you have to do is get base materials (like wire and cardboard hangers), shape them into wings, and decorate.

Steps

Method 1 of 4: Making Angel Wings

Make Costume Wings Step 1
Make Costume Wings Step 1

Step 1. Get some cardboard

You can make the wings using a simple cardboard (which you can find at home) or a box in which you have received something that you bought in a store. Since you are going to decorate the cardboard later, it does not matter what color it is at the beginning. Other good elements that you can also use are white foam or cardboard.

Make Costume Wings Step 2
Make Costume Wings Step 2

Step 2. Cut the wings

You should first outline the shape of the wings before you start cutting them. You can give them the shape you like the most, but a good option is to make them in a shape that resembles a comma. Begin to draw a rounded shape at one end. As you cut the cardboard, the top edge of the brim should curve downward, to the point where it meets the bottom cut. You can use scissors or a utility knife to carry out this procedure.

  • The length of the wings depends on the person who is going to use them. You should make them long enough so that they protrude a few inches beyond the shoulders. You can also place them against the back of the person who is going to use them so that they point downwards instead of outwards.
  • You can fold the cardboard in half to cut both wings at the same time. However, if you cut them one at a time, you shouldn't worry if they don't match.
  • You can outline the shape of the wings with a writing utensil before cutting them, but they don't need to be perfectly symmetrical. The decoration that you are going to do later will cover all the imperfections.
Make Costume Wings Step 3
Make Costume Wings Step 3

Step 3. Measure the width of the shoulders

If you are making the wings for someone else, you should hold them against their back or try to measure the width of your shoulders. You have to drill a couple of holes for the wings to hold tight against the shoulders without feeling tight.

Make Costume Wings Step 4
Make Costume Wings Step 4

Step 4. Pierce the wings

You can use scissors, a screwdriver, a pen, or other household utensils to poke the holes. Punch a hole over the end of the brim that sits above the shoulders. Then make a second hole a little lower. You must repeat the same procedure with the other wing.

Make Costume Wings Step 5
Make Costume Wings Step 5

Step 5. Pass a tape through the holes

With this tape, you are going to form the loops for the arms. You can use a white ribbon to match the color of the wings. The amount of tape you need will be determined by the amount of space required by the person using the wings. Wrap the tape around the shoulder before cutting. You should provide some extra tape so that you can tie the wings. Thread each end of the ribbon through the holes in the back of the wings. Then tie the ribbon around the front of these.

You can use a stronger headband that is specially designed for children who move around a lot while wearing their wings. You can also use shoelaces or elastic bands

Make Costume Wings Step 6
Make Costume Wings Step 6

Step 6. Decorate the wings

You can make the wings as angelic as you want. All up to you. Feathers are considered a very obvious choice for angel wings, but you can also use coffee filters and toilet paper. Use tape or glue to stick the material to the back of the wings.

  • You can paint the cardboard with white paint before adding fluff to prevent brown spots from forming. You can also cover the entire underside of the wings with enough white trim to avoid this problem.
  • Use tape or glue to tape the feathers onto their bases while pointing downward to create a neat, even look.
  • Squeeze several squares of toilet paper from the center to form dots. Then stick them on the cardboard.
  • You can fold the coffee filters in half and glue them over the wings from the outside to the inside, keeping the folds of the first filters on the edges of the wings.

Method 2 of 4: Making Butterfly Wings

Make Costume Wings Step 7
Make Costume Wings Step 7

Step 1. Shape the hangers

Take four wire hangers. Stretch and fold them to form the outline of the wings. The upper part of both wings should be thinner and larger, while the lower part should be shorter and wider.

Card stock is considered a good substitute material, as it can be cut, shaped into a wing, covered with felt, and then decorated

Make Costume Wings Step 8
Make Costume Wings Step 8

Step 2. Cover the hangers with felt

You can use adhesive black felt or tape, as these materials adhere well to metal. You should take the pieces of felt one at a time and carefully wrap them over the exposed parts of the hangers. This procedure also serves to smooth out protruding metal edges so that they do not pierce the decorative material later on.

Make Costume Wings Step 9
Make Costume Wings Step 9

Step 3. Cover the wings with garbage bags

You can use one or two garbage bags per wing. Stretch them as hard as you can on the hangers. If the material clumps together at one end or stays loose and hanging, you can trim the open end until it more securely covers the brim. Place the bags around the front of the hangers.

Make Costume Wings Step 10
Make Costume Wings Step 10

Step 4. Cut out orange felt patterns

If you are making wings for a child, you can let them participate in the decorating process. Use scissors to cut out patterns from colored felt. Then glue them on the back of the wings. You can cut out different shapes and place them side by side to create patterns like a monarch butterfly.

Make Costume Wings Step 11
Make Costume Wings Step 11

Step 5. Decorate the wings

To finish decorating, you can add embellishments over the black edges of the wings. In this way, you will hide the detail of the garbage bags and give the wings a touch of variety. One way to achieve this is by adding different sized gold and white office stickers, but you can also use other alternatives (eg paint).

Make Costume Wings Step 12
Make Costume Wings Step 12

Step 6. Fasten the wings using velcro

You only need two strips of this material to secure the wings. The adhesive sides of the velcro adhere to the inner side of the wings and to the back of the clothing. To put on the wings, you just have to join both sides of the velcro and that's it.

Arm or thumb loops can be sewn onto felt covered cardboard. You should wrap the material around the shoulders or thumbs (of the person who will be using the wings) to measure the amount of material you will need. You should hold the material in loops on the wings. Then use pins or a sewing needle to attach the loops to the wings

Method 3 of 4: Make Fairy Wings

Make Costume Wings Step 13
Make Costume Wings Step 13

Step 1. Bend some wire hangers

You only need two to four hangers for the wings, depending on how many you want to make. You need to bend two hangers to give them the shape of a wing. Then place them one on top of the other to check for pairs. If you see that it is necessary, you should adjust them. These wings should look rounded, but you can make two additional square wings and attach them to the bottom to make them look like Tinkerbell's (from Disney's “Peter Pan” movie).

Make Costume Wings Step 14
Make Costume Wings Step 14

Step 2. Attach the hanger hooks

Lay the wings on a table with the hooks facing each other. You can cut these ends and tangle the resulting four ends together. However, you can also combine the hooks by applying a little force to tangle them together.

You should secure the hooks well as you tangle them so that the sharp ends do not stick out

Make Costume Wings Step 15
Make Costume Wings Step 15

Step 3. Cover the metal joints

To prevent the tangled part of the hangers from hurting the person who is going to wear the wings, you should pad the central part of the wings. To achieve this, you can apply any type of felt or fabric that you find at home. Wrap the fabric around the metal, then use masking tape to secure it.

Make Costume Wings Step 16
Make Costume Wings Step 16

Step 4. Cover the wings using pantyhose

Cut the legs out of the pantyhose. Take one of these and put a wing on it. You should do the same with the other leg and repeat the procedure if you have more wings. The loose fabric should be in the center of the wings. You should wrap the excess fabric around the center of the wings. Tie a knot to tie off this excess, then adjust the brim to make it even.

If you can, you should match the pantyhose to the base color you want the wings to have. You can also spray paint over the pantyhose when the wings are finished to make them more colorful

Make Costume Wings Step 17
Make Costume Wings Step 17

Step 5. Use pantyhose to form the arm holders

Cut off the leg part of other pantyhose. Take one and wrap it around one end of the center part where the wings meet. Tie the ends of the fabric into a loop for the arms. You must repeat this procedure with the other leg on the other side.

Make Costume Wings Step 18
Make Costume Wings Step 18

Step 6. Decorate

You can customize the wings to your liking. One way to do this is to get flowers or clouds from a craft store and sew or glue them using a hot glue gun on the knot where the wings meet. You can also wrap the knot in duct tape sprayed with spray paint. Children can participate in the decoration by adding different materials (such as plastic jewelry or glitter).

Method 4 of 4: Making Bat Wings

Make Costume Wings Step 19
Make Costume Wings Step 19

Step 1. Measure the length of the fabric

The amount of fabric you will need will depend on the length and width of the back of the person wearing the wings. You should measure the width of this person's wrist and the length from neck to waist. You should also measure the circumference of his arm and add this measurement to the length of fabric you need.

Make Costume Wings Step 20
Make Costume Wings Step 20

Step 2. Buy the fabric

You should use all these measures and get enough fabric to cover the back and arms of the person who will be wearing the wings. You should get a black, stretchy fabric (for example, lycra), since you can cut this material without leaving frayed ends.

To make seamless bat wings, you need to cut the top and bottom sections of an umbrella. Next, you need to cut the metal pieces using a wire cutter

Make Costume Wings Step 21
Make Costume Wings Step 21

Step 3. Fold the fabric

You can carry out this procedure from the far left or right. The fabric should be half the width of the original measurement. Next, take the top end of the fabric and fold it down just enough so that you can see the correct amount of fabric you need to create the armholes. You should not cut this folded fabric. Just mark the bottom end of the arm clip before unfolding it.

Make Costume Wings Step 22
Make Costume Wings Step 22

Step 4. Cut the border

Take a pair of scissors and cut the corner into a semicircle right where you marked the fabric. The bottom of the circle should be toward the middle of the remaining fabric, while the ends of the cut should be an even distance along the edges of the fabric.

Make Costume Wings Step 23
Make Costume Wings Step 23

Step 5. Fold the sleeve

You should fold the remaining top of the fabric next to the cut you made. Then bring it down far enough that an arm sleeve is recreated.

Make Costume Wings Step 24
Make Costume Wings Step 24

Step 6. Cut semicircles on the bottom of the fabric

Start cutting right in front of where you cut the first semicircle. You should leave the bottom corner where you cut the first semicircle intact, but cut up and down to create another semicircle. Continue along the bottom of the fabric, cutting further to angle the wings a bit.

Make Costume Wings Step 25
Make Costume Wings Step 25

Step 7. Sew the sleeves

Unfold the fabric. Take the uncut top and fold it over to create the sleeves. Sew the bottoms of the sleeves to form a cape. Now, you can have fun with your new bat wings.

Popular by topic